Dongfeng DFZ5248PXYVB3G soft top box van truck manufactured by Dongfeng Suizhou Special Vehicle Co., Ltd.
DFZ5248PXYVB3G
Dongfeng Chinese box van truck with soft canopy top DFZ5248PXYVB3G manufactured by Dongfeng Suizhou Special Vehicle Co., Ltd. (a special purpose vehicle manufacturer in Suizhou, Hubei Province, China; manufactures a range of Dongfeng vehicles, including box van trucks with soft canopy top); the box van truck with soft canopy top based on EQ3248VB3GJ chassis. Wheelbase is 1950+2850+1350, 1950+3100+1350 mm, tires are 11.00-20, 11.00R20, diesel fuel, gross vehicle weight is 24135 kg, curb weight is of the China truck 11950 kg, cargo body is 6500/6800 × 1800 × 2300 mm, max. speed is 80 km/h, environmental standard is National III / Euro 3, engine: YC6A240-31 / YC6A260-31 / YC6A240-33 / YC6A260-33, cab seating capacity is 3, rated capacity is 11990 kg.
Technical Specifications of the China truck Dongfeng
Dimensions and Weights of the China truck Dongfeng DFZ5248PXYVB3G
Dimensions and Weight Specifications of the China truck
Overall Dimensions of the China truck
Overall length (mm)
9250/9550
Overall width (mm)
2490
Overall height (mm)
3450
Cargo Body Dimensions
Cargo body length (mm)
6500/6800
Cargo body width (mm)
1800
Cargo body height (mm)
2300
Weights, Ground Pressure and Capacity
Rated capacity (kg)
11990
Curb weight of the China truck (kg)
11950
Gross vehicle weight (kg)
24135
Load factor (payload to weight ratio)
1.01
Axle load distribution (kg)
3730/3750/16655 (tandem axle)
Wheel Base and Track
Wheelbase (mm)
1950+2850+1350, 1950+3100+1350
Front track (mm)
1940/1940
Rear track (mm)
1860/1860
Front/rear overhang (mm)
1205/1895, 1205/1945
Angle of approach/departure (deg.)
30/21, 30/20
Wheels and Tires
Tires and Wheels of the China truck Dongfeng DFZ5248PXYVB3G
Number of axles
4
Number of tires
12
Tires dimension
11.00-20, 11.00R20
Misc. Specifications
Miscellaneous Specifications Dongfeng DFZ5248PXYVB3G (soft top box van truck)
Max. speed
80
Cab seating capacity
3
Steering
steering wheel
Leaf springs
8 / 8 / 13, 8 / 8 / 10
Additional Information
Cargo floor to the height of the top of 2000mm, both sides of the carriages were nowhere. Variation due to dimensional changes caused by the quality parameter is less than 3%, only a set of quality parameters marked. Dimensions Length, Body dimension length, wheelbase, departure angle, the rear overhang is one relationship. Side guards made of material Q235-A, bolt connection. Rear protective device made of material Q235-A, bolt connection, cross section dimension (L × W) 120mm × 50mm, ground clearance is 510mm. Should be installed tachograph. (Note: possible inaccuracies)
Photo gallery of the China truck Dongfeng DFZ5248PXYVB3G
