Dongfeng EQ3318AT5 dump truck manufactured by Dongfeng Special Automobile Co., Ltd.
EQ3318AT5
Dongfeng Chinese dump truck (tipper truck) EQ3318AT5 manufactured by Dongfeng Special Automobile Co., Ltd. (a special vehicle manufacturer in Shiyan, Hubei Province, China; manufactures a range of Dongfeng vehicles, including dump trucks); the dump truck (tipper truck) based on DFL3318A4 chassis. Curb weight is of the China dump truck 14770 kg, cab seating capacity is 2, 3, cargo body is 8400/8600 × 1000 × 2300 mm, without ABS, wheelbase is 1850+4200+1450, 1850+4600+1450 mm, gross vehicle weight is 31000 kg, tires are 11.00-20, 11.00R20, 12.00-20, 12.00R20, environmental standard is National III / Euro 3, diesel fuel, rated capacity is 16100, 16035 kg, engine: dCi340-30 / EQR340-33 / dCi375-30 / EQR375-33 / YC6M340-33 / YC6M340-31 / YC6M375-31 / YC6M375-33 / ISLe340 30 / L340 30 / ISLe375 30 / L375 30, max. speed is 80 km/h.
Technical Specifications of the China dump truck Dongfeng
1, dump mode after tilting. 2, curb weight differences due to the car caused by the change in length of 3% range, negligible. 3, only a selection of the car on the chassis 1850 +4600 +1450 mm wheelbase. 4, Foreign Minister - car long - wheelbase - rear suspension - departure angle (mm) correspondence between the following :11300 -8400-1850 +4600 +4600 +1450-2000-31 +1450-1900-32,11400-8600-1850 ,11500 -8600-1850 +4600 +1450-2100-30. 5, with optional chassis cab high roof. 6, the optional new container structure. 7, corresponding to a total length 11400mm 8600mm long car corresponds to flat cab car length 8600mm overall length 11500mm corresponding corresponding high roof cab. 8, with optional chassis under the new endoscopy. 9, guards the materials used Material: Q235, Connection: bolt connection, cross-sectional dimensions of the rear protective device (mm): 110 × 100, ground clearance: 430mm. 9, the vehicle traveling data recorder should be installed. (Note: possible inaccuracies)
Photo gallery of the China dump truck Dongfeng EQ3318AT5
