Chenglong Chinese dump truck (tipper truck) LZ3200PDL manufactured by Dongfeng Liuzhou Automobile Co., Ltd. (an automobile manufacturer in Liuzhou, Guangxi Zhuang Autonomous Region, China; manufactures a range of Dongfeng, Chenglong vehicles, including dump trucks); the dump truck (tipper truck) based on LZ3200PDLT chassis. Rated capacity is 9880, 9930, 9930, 9980, 9980 kg, environmental standard is National II / Euro 2, cab seating capacity is 2, diesel fuel, curb weight is of the China dump truck 10000, 9950, 9950, 9900, 9900 kg, without ABS, gross vehicle weight is 20010 kg, tires are 12.00-20, 12.00R20, 11.00-20, 11.00R20, total mass of trailer is 9980 kg, wheelbase is 4825+1350, 4500+1350 mm, cargo body is 7200/7000/6800/6500/6300/7600 × 800 × 2300 mm, engine: WP10.300N / WP10.336N / YC6M290-30 / YC6M340-31 / YC6M290-33, max. speed is 75 km/h.
Technical Specifications of the China dump truck Chenglong
While the optional high roof cab fitted under the bumper. Compartment dump mode after dump. 7200 wagon long time: front / rear overhang (mm): 1560/2247, Approach / departure angle: 25/19, with a lower bumper, Approach / departure angle: 21/19; trunk length 7000: Before Front / rear overhang (mm): 1560/2072, Approach / departure angle: 25/19, with a lower bumper, Approach / departure angle: 21/19; trunk length 6800 when: Front / rear overhang (mm ): 1560/2072 Approach / departure angle: 25/21, with a lower bumper, Approach / departure angle: 21/21; close to departure angle (°) can be as follows: 21/21, 25/22 , 21/22, 25/17, 21/17 front rear / rear overhang (mm) can be as follows: 1560/2092, 1560/1962. Added mass change caused by the length of the container changes within a range of 3%. 7600 wagon long time: front / rear overhang (mm): 1560/2550, Approach / departure angle: 25/17, with a lower bumper, Approach / departure angle: 21/17; front suspension rear suspension also To (mm): 1560 / over 2550 relevant technical parameters of one relationship. Side and rear underrun protection device: 1 Material Material:. Q235-A2 Connection: bolt connection 3 main dimensions (cross-sectional dimensions and height above ground) rear protective device (1) cross-section dimensions:. 100mmx50mm (2) from the in height: 530mm. Should be installed tachograph. (Note: possible inaccuracies)
Photo gallery of the China dump truck Chenglong LZ3200PDL
