Chenglong Chinese dump truck (tipper truck) LZ3256QDL manufactured by Dongfeng Liuzhou Automobile Co., Ltd. (an automobile manufacturer in Liuzhou, Guangxi Zhuang Autonomous Region, China; manufactures a range of Dongfeng, Chenglong vehicles, including dump trucks); the dump truck (tipper truck) based on LZ3256QDLT chassis. Diesel fuel, tires are 11.00-20, 11.00R20, 12.00-20, 12.00R20, environmental standard is National II / Euro 2, total mass of trailer is 9980 kg, curb weight is of the China dump truck 12480, 12460, 12430, 12380, 12330 kg, rated capacity is 12350, 12370, 12400, 12450, 12500, 12285, 12305, 12335, 12385, 12435 kg, cargo body is 7200/7000/6800/6500/6300 × 900/920 × 2300 mm, cab seating capacity is 2, 3, engine: WD615.93E, wheelbase is 4825+1350, 4500+1350 mm, max. speed is 75 km/h, gross vehicle weight is 24960 kg, without ABS.
Technical Specifications of the China dump truck Chenglong
Optional high roof cab and under the bumper. Elected mounted flat driving, its dimensions height 3520, when elected high roof cab, its dimensions height 3680. When Cab man 2, which sets out the quality of the five groups corresponding value; Cab man when three people, five groups corresponding value after its payload. Elected mounted flat cab, its approach angle of 25, when elected high roof cab, its approach angle is 19; When the box length is 7200mm, its departure angle of 19, box length is 7000mm, 6800mm, 6500mm its departure angle of 21, box length is 6300mm, its departure angle is 22, and the rest correspond to multiple related parameters. Compartment way to dump after dump quality can be rated as (kg):. 12500,12285,12305,12335,12385,12435.Departure angle is also close to (degrees): 25/21, 19/21, 25/22, 19/22 front rear suspension also for (mm):. 1512/2120, 1512/2140, 1512/2010; axle load can be as follows: 6982/17978 (and biaxial), 6980/17980 (and biaxial), 6985/17975 (and biaxial) side and rear underrun protection device: 1 Material Material: Q235- A2 connections: bolted three main dimensions (cross-sectional dimensions and height above ground) rear protective device (1) cross-section dimensions:. 100mmx50mm (2) Ground clearance: 530mm. Should be installed tachograph. (Note: possible inaccuracies)
Photo gallery of the China dump truck Chenglong LZ3256QDL
