Dongfeng DFL3258A3 dump truck manufactured by Dongfeng Motor Co., Ltd.
DFL3258A3
Dongfeng Chinese dump truck (tipper truck) DFL3258A3 manufactured by Dongfeng Motor Co., Ltd. (an automobile manufacturer in Wuhan, Hubei Province, China; manufactures a range of Dongfeng, Dongfeng Aeolus Fengshen, Venucia Qichen, Dongfeng Nissan, Infiniti, Nissan Livina, Nissan Livina Geniss, Nissan Teana, Nissan Bluebird Sylphy, Nissan Tiida, Nissan vehicles, including dump trucks); the dump truck (tipper truck) based on DFL3258A3 chassis. Max. speed is 85 km/h, gross vehicle weight is 25000 kg, total mass of trailer is 10000 kg, with ABS, curb weight is of the China dump truck 11910 kg, wheelbase is 3800+1450, 3800+1350, 4050+1350 mm, cargo body is 5400/5600/5800 × 1150 × 2300 mm, tires are 11.00-20, 11.00R20, 12.00-20, 12.00R20, engine: dCi340-30 / dCi290-30 / ISLe340 30 / ISLe290 30 / YC6M340-33 / YC6M290-33 / L340 30 / L290 30 / EQR340-33 / EQR300-33, rated capacity is 12960, 12895 kg.
Technical Specifications of the China dump truck Dongfeng
Quality parameters configuration changes caused by the change in less than 3%, is negligible. Dump mode after unloading. Packing election board structure, optional environmental cover. With the optional chassis front lower endoscopy installation location.Side protection and rear protective materials used for Q235, side guard bolted connection, the lower part of the protective equipment for the welding connection section size (mm) of 100 × 50, ground clearance of 430mm. The car should be installed with GPS The tachograph. Foreign Minister - car long - wheelbase - rear overhang - the departure angle correspondence 8200-5400-3800 + 1450-1450-29; 8300-5600-3800 + 1450-1550-28; 8450-5800-3800 + 1450-1700- 27; 820 (Note: possible inaccuracies)
Photo gallery of the China dump truck Dongfeng DFL3258A3
