Dongfeng DFL3318A5 dump truck manufactured by Dongfeng Motor Co., Ltd.
DFL3318A5
Dongfeng Chinese dump truck (tipper truck) DFL3318A5 manufactured by Dongfeng Motor Co., Ltd. (an automobile manufacturer in Wuhan, Hubei Province, China; manufactures a range of Dongfeng, Dongfeng Aeolus Fengshen, Venucia Qichen, Dongfeng Nissan, Infiniti, Nissan Livina, Nissan Livina Geniss, Nissan Teana, Nissan Bluebird Sylphy, Nissan Tiida, Nissan vehicles, including dump trucks); the dump truck (tipper truck) based on DFL3318A4 chassis. Gross vehicle weight is 31000 kg, cab seating capacity is 2, max. speed is 80 km/h, wheelbase is 1850+4200+1450, 1850+4600+1450 mm, without ABS, diesel fuel, cargo body is 8400/8600 × 1000/1000 × 2300 mm, engine: dCi340-30 / EQR340-33 / dCi375-30 / EQR375-33 / YC6M340-33 / YC6M340-31 / YC6M375-31 / YC6M375-33 / ISLe340 30 / L340 30 / ISLe375 30 / L375 30, environmental standard is National III / Euro 3, rated capacity is 16080 kg, tires are 11.00-20, 11.00R20, 12.00-20, 12.00R20, curb weight is of the China dump truck 14790 kg.
Technical Specifications of the China dump truck Dongfeng
I. choose only the chassis wheelbase 1850 +4600 +1450; dump mode after unloading. Two long car car high correspondence between: 84001000; 86001000 three car length 8400,8600 11300,11400 corresponding length of the corresponding flat cab; hand long 8400,8600 11400,11500 corresponding length of the corresponding high-roof cab, rear overhang 1900 / 2000 corresponding departure angle of 32, the corresponding rear overhang 2100 departure angle is 31. Four. Cargo body (cargo compartment) size to curb the influence of changes within 3%, is negligible. With the optional chassis front lower endoscopy installation location. The car should be installed tachograph. (Note: possible inaccuracies)
Photo gallery of the China dump truck Dongfeng DFL3318A5
