Dongfeng EQ3258AT4 dump truck manufactured by Dongfeng Special Automobile Co., Ltd.
EQ3258AT4
Dongfeng Chinese dump truck (tipper truck) EQ3258AT4 manufactured by Dongfeng Special Automobile Co., Ltd. (a special vehicle manufacturer in Shiyan, Hubei Province, China; manufactures a range of Dongfeng vehicles, including dump trucks); the dump truck (tipper truck) based on DFL3251A7 chassis. Cab seating capacity is 2, 3, rated capacity is 12960, 12895 kg, engine: dCi340-30 / dCi290-30 / ISLe340 30 / YC6M340-30 / ISLe290 30 / YC6M340-31 / YC6M290-30 / YC6M340-33 / YC6M290-33 / L290 30 / L340 30 / EQR340-33 / EQR300-33, gross vehicle weight is 25000 kg, environmental standard is National III / Euro 3, wheelbase is 4250+1350, 4600+1350, 4250+1450, 4600+1450, 4900+1350 mm, max. speed is 85 km/h, total mass of trailer is 10000 kg, cargo body is 6200/6400/6600/6800 × 1020 × 2300 mm, diesel fuel, curb weight is of the China dump truck 11910 kg, without ABS, tires are 11.00-20, 11.00R20, 12.00-20, 12.00R20.
Technical Specifications of the China dump truck Dongfeng
1, dump mode after tilting. 2, curb weight differences due to the car caused by the change in length of 3% range, negligible. 3, only a selection of the car on the chassis 4250 +1450 mm wheelbase. 4, Foreign Minister - car long - wheelbase - rear suspension - departure angle (mm) correspondence follows :8900 -6200-4250 +1450-1700-22,9100-6400-4250 +1450-1900-21,9300-6600 -4250 +1450-2100-20,9350-6800-4250 +1450-2150-20.5, optional new container structure. 6 With the optional chassis under the new endoscopy. 7, guards the materials used Material: Q235, Connection: bolt connection, cross-sectional dimensions of the rear protective device (mm): 110 × 100, ground clearance: 430mm. 8, the car should be installed tachograph. (Note: possible inaccuracies)
Photo gallery of the China dump truck Dongfeng EQ3258AT4
