Dongfeng DFL5203XXBA1 soft top box van truck manufactured by Dongfeng Motor Co., Ltd.
DFL5203XXBA1
Dongfeng Chinese box van truck with soft canopy top DFL5203XXBA1 manufactured by Dongfeng Motor Co., Ltd. (an automobile manufacturer in Wuhan, Hubei Province, China; manufactures a range of Dongfeng, Dongfeng Aeolus Fengshen, Venucia Qichen, Dongfeng Nissan, Infiniti, Nissan Livina, Nissan Livina Geniss, Nissan Teana, Nissan Bluebird Sylphy, Nissan Tiida, Nissan vehicles, including box van trucks with soft canopy top); the box van truck with soft canopy top based on DFL1203A1 chassis. Total mass of trailer is 9000 kg, cab seating capacity is 3, 2, curb weight is of the China truck 10140 kg, gross vehicle weight is 20490 kg, max. speed is 90 km/h, cargo body is 9400/9600 × 2294 × 2200 mm, engine: ISDe21030 / ISDe24530, wheelbase is 1950+5350 mm.
Technical Specifications of the China truck Dongfeng
Dimensions and Weights of the China truck Dongfeng DFL5203XXBA1
Dimensions and Weight Specifications of the China truck
Overall Dimensions of the China truck
Overall length (mm)
11990
Overall width (mm)
2500
Overall height (mm)
3900
Cargo Body Dimensions
Cargo body length (mm)
9400/9600
Cargo body width (mm)
2294
Cargo body height (mm)
2200
Weights, Ground Pressure
Curb weight of the China truck (kg)
10140
Gross vehicle weight (kg)
20490
Load factor (payload to weight ratio)
1.02
Axle load distribution (kg)
4800/4800/10890
Total mass of trailer (kg)
9000
Wheel Base
Wheelbase (mm)
1950+5350
Front and Rear Overhang
Front overhang (mm)
1460
Rear overhang (mm)
3230
Angle of Approach and Departure
Angle of approach (deg.)
30
Angle of departure (deg.)
18
Wheels and Tires
Tires and Wheels of the China truck Dongfeng DFL5203XXBA1
Number of axles
3
Misc. Specifications
Miscellaneous Specifications Dongfeng DFL5203XXBA1 (soft top box van truck)
Max. speed
90
Cab seating capacity
3, 2
Steering
steering wheel
Additional Information
Only highly different optional cab high roof cab roof air horn as optional parts, canopy pole top to the bottom of the cargo compartment interior height 2400mm; optional chassis with front mounting position under endoscopic side protection: Material Q235. , bolted connections after following protection: Material Q235, bolted connections, section size 120 × 60mm, ground clearance 490mm. (Note: possible inaccuracies)
