Dongfeng DFL5253XXBAX1 soft top box van truck manufactured by Dongfeng Motor Co., Ltd.
DFL5253XXBAX1
Dongfeng Chinese box van truck with soft canopy top DFL5253XXBAX1 manufactured by Dongfeng Motor Co., Ltd. (an automobile manufacturer in Wuhan, Hubei Province, China; manufactures a range of Dongfeng, Dongfeng Aeolus Fengshen, Venucia Qichen, Dongfeng Nissan, Infiniti, Nissan Livina, Nissan Livina Geniss, Nissan Teana, Nissan Bluebird Sylphy, Nissan Tiida, Nissan vehicles, including box van trucks with soft canopy top); the box van truck with soft canopy top based on DFL1253AX1 chassis. Cab seating capacity is 3, 2, curb weight is of the China truck 12500 kg, max. speed is 90 km/h, total mass of trailer is 5000 kg, wheelbase is 1950+5350 mm, gross vehicle weight is 25000 kg, engine: ISDe21030 / ISDe24530, cargo body is 9400/9600 × 2294 × 2200 mm.
Technical Specifications of the China truck Dongfeng
Dimensions and Weights of the China truck Dongfeng DFL5253XXBAX1
Dimensions and Weight Specifications of the China truck
Overall Dimensions of the China truck
Overall length (mm)
11990
Overall width (mm)
2500
Overall height (mm)
3900
Cargo Body Dimensions
Cargo body length (mm)
9400/9600
Cargo body width (mm)
2294
Cargo body height (mm)
2200
Weights, Ground Pressure
Curb weight of the China truck (kg)
12500
Gross vehicle weight (kg)
25000
Load factor (payload to weight ratio)
1.00
Axle load distribution (kg)
7000/7000/11000
Total mass of trailer (kg)
5000
Wheel Base
Wheelbase (mm)
1950+5350
Front and Rear Overhang
Front overhang (mm)
1460
Rear overhang (mm)
3230
Angle of Approach and Departure
Angle of approach (deg.)
30
Angle of departure (deg.)
18
Wheels and Tires
Tires and Wheels of the China truck Dongfeng DFL5253XXBAX1
Number of axles
3
Misc. Specifications
Miscellaneous Specifications Dongfeng DFL5253XXBAX1 (soft top box van truck)
Max. speed
90
Cab seating capacity
3, 2
Steering
steering wheel
Additional Information
Only highly different optional cab high roof cab roof air horn as optional parts, engine ISDe21030 net power of 150kW, the engine ISDe24530 net power of 174kW, tent pole top to the bottom of the cargo compartment interior height 2400mm; with chassis Optional mounting position before the next endoscopic side protection: Material Q235, bolted connections after following protection: Material Q235, bolted connections, section size 120 × 60mm, 490mm ground clearance side can not open the door. (Note: possible inaccuracies)
